|
Untitled document
GENUINE STAUN TYRE DEFLATORS
SET OF 4
+ LEATHER POUCH
IMPORTANT CONSIDERATION....
THIS PRODUCT DOES NOT DE-SEAT YOUR TYRE VALVES EVERY TIME YOU USE THEM.
THERE IS A PRODUCT THAT DOES, AND TAKES LONGER TO USE, BUT IT'S NOT A STAUN....
|
THERE ARE SO MANY FEATURES OF STAUN TYRE DEFLATORS THAT MAKE THEM SUCH A UNIQUE PRODUCT:
 |
They are fully adjustable
Each valve has an adjustment range specific to the level of deflation you require
They are easy to use, not requiring any tools
They are highly accurate, deflating to within 0.05psi of the preset pressure they have been adjusted to
They are the smallest tyre deflators available measuring only 30mm x 15mm (1.18" x 0.6")
They are one of the lightest deflators weighing only 32 grams (1.13 ounces)
They are made of 100% brass
They are the fastest deflators on the market (tests found a normal 10rx15 tyre takes approx. 1 minute and 30 seconds to deflate from 32psi to 18psi)
Every valve is completely pre-tested to ensure high performance
They are covered with a 5 year guarantee
They can be used for all types of four wheel driving ranging from coastal sand driving, desert sand driving, rock climbing to mud driving.
|
|
STAUN TYRE DEFLATORS ARE THE EASIEST, MOST ACCURATE WAY OF DECREASING YOUR VEHICLE'S TYRE PRESSURE.
THEY ARE THE MOST SUPERIOR HIGH QUALITY, FULLY GUARANTEED DEFLATORS AVAILABLE ON THE MARKET.
There are several benefits of deflating your tyres to a lower pressure that extend beyond generally improving your vehicle's overall performance.
THESE BENEFITS INCLUDE:
INCREASING YOUR VEHICLE'S TRACTION
A 25-30% decrease in tyre pressure will yield up to 250% improvement in traction, by increasing the depth and width of the tyre on the surface.
INCREASING THE FOOT PRINT
MINIMISING ENVIRONMENTAL DISRUPTION
An inflated tyre will leave a noticeably more significant imprint on the terrain it is crossing, which can be reduced by simply reducing the tyre pressure. This works to protect and conserve our natural environment, meaning everyone can enjoy the off-road experience in the future.
IMPROVED ABLITY TO TRAVEL ON SOFTER SURFACES
The bigger the footprint, the softer the surface you can travel on as the weight of the vehicle is distributed over a larger surface area. When tyres have very little or no traction they have a greater chance of getting bogged down or stuck in the surface or terrain that they are being driven through.
REDUCING RESISTANCE TO OBSTACLES
Tests have shown a 40% improvement in overcoming obstacles at lower tyre pressures, due to the low pressure tyres being able to contort over the obstacle. Therefore the drive becomes a less bumpy, much softer ride.
OBSTACLE ROLLING RESISTANCE
IMPROVING FUEL ECONOMY BY 10-15%
Fuel usage increases when tyres are at higher pressures because more revs and greater acceleration is required to take the vehicle over the off-road surfaces.
BEING SAFER AT HIGHER SPEEDS
The increased surface area of the tyres enables the vehicle to be stabilised at higher speeds on softer surfaces.
REDUCING WEAR AND TEAR ON DRIVE TRAIN COMPONENTS
When driving with higher tyre pressure on soft surfaces your vehicle must be driven in lower gears to go over the terrain, resulting in more wear and tear on drive train components such as differentials, gear boxes and axle bearings.
STAUN TYRE DEFLATORS ARE BY FAR THE QUICKEST AND EASIEST WAY TO REDUCE TYRE PRESSURE - SAY GOODBYE TO THE HASSLE OF FIDDLING AROUND WITH KEYS, MATCHSTICKS OR POOR QUALITY DEVICES.
Basically all you have to do is screw a deflator onto your tyre valve stem and then leave them to do all of the work - YOU DON'T EVEN NEED ANY TOOLS TO USE THEM!
The deflators are supplied at a preset pressure, however you can adjust this pressure to your desired level. It is not necessary to reset them again unless you wish to change the psi that you want to reduce your tyre pressure to.
Exactly how much you reduce your tyre pressure depends on a variety of factors, such as how much weight your tyres are supporting. Additionally the softness of the surface that you are travelling through will also affect how much you need to let your tyres down. Through trial and error you can find your personal preference and determine what tyre pressure suits you.
Staun Tyre Deflators do not have a minimum start off pressure so you do not need to bring your tyre pressure back up in order to reduce it further. Simply turn the adjusting cap anti-clockwise to further reduce your tyre pressure. If they do not start automatically you can manually start them by lifting the pin. Please check your product header card for individual pressure settings.
The Staun Tyre Deflators need to be screwed on from the finger grip located at the base of the valve. Do not use the adjusting cap or lock ring to fix the deflator to the valve stem.
For a comprehensive demonstration on how to install the deflators onto your tyres please see our sales team,
or contact our office via email at chris@fnb4wd.com.au or phone on 1300 307 165.
 |
|
This deflator has been designed to suit most 4WD deflation needs. Suitable for beach or bush pressures it comes preset at 18psi and is accurate to within 0.25psi.
It has an adjustment of 3psi per half turn and 6psi per full turn of the adjustment cap. Requiring 7 psi above its preset pressure to start automatically, they can be started manually by lifting the pin at as little as 2 psi above its preset pressure.
THE BEST PRICES ON STAUN PRODUCTS ARE RIGHT HERE !!!
|
|
You must be registered or signed in to be able to bid or contact the seller.
;)
Domestic:
